How to Connect Xbox One Controller to PC?

You can get the best of both worlds by learning how to Connect Xbox One Controller to a PC. You get the power of a gaming PC with the convenience of a console controller. In this case, you get both power and comfort. Even though using a keyboard and mouse to play is fun, many gamers prefer the cleaner button layout of an Xbox wireless controller. Because Microsoft has made the console pad PC-compatible, setting it up is a breeze. Fortunately.

How to Connect Xbox One Controller to PC?

It is possible to connect an Xbox one controller to your computer using several different techniques and cables. Alternatively, you can use a Micro-USB/USB-C cable to link the two devices wirelessly. It’s also possible to link the controller to your PC via an Xbox Wireless adapter, which requires additional hardware.

The Xbox wireless pad is not compatible with all PC games. Visit the publisher’s website or the marketplace where you buy games to see if it supports controllers. With that out of the way, here are the directions for connecting an Xbox wireless controller to a computer.

1. Connect Xbox Controller Using USB Cable

When connecting an Xbox one controller to a PC, it’s important to know that the process differs significantly depending on the controller you’re using. The Xbox Series X, Xbox Elite Series 2, and Xbox Adaptive controllers require a USB-C cable, whereas the previous Xbox One pad has a Micro-USB connector.

1. Xbox controller and PC are connected through a wire. You’ll need to use either a USB-C or Micro-USB cable to connect your controller to your PC.
2. Now that your controller and PC are connected, Press the Xbox button on your controller to turn it on.
3. When your controller is plugged in and turned on, Windows will automatically install the necessary driver software. This is a one-and-done procedure that should take no more than a few minutes. In the future, you won’t have to go through this process when connecting your controller to your PC. Your controller has been successfully linked to the network.

2. Connect Xbox One Controller Via Bluetooth

The new controller that was released with the Xbox Series S has Bluetooth, but the original Xbox One controller does not have it. To tell the two apart, look at the plastic molding at the top or look for a 3.5 mm headphone connector on the bottom of the newer controllers.

That port is absent from your Xbox One pad, which means you don’t have Bluetooth.

1. Open your PC’s Bluetooth and other devices menu. You can access the Bluetooth & other devices menu by typing “Bluetooth” into the Windows search bar in the left-hand corner of your screen. Check to see if Bluetooth is enabled.
2. To activate the Xbox button, press the Xbox button on your controller. As soon as the Xbox logo begins to flash rapidly, hold down your controller’s sync button on top of the controller (the one with three dashes next to it).
3. Click Add Bluetooth or another device in the Bluetooth settings menu and then pick Bluetooth in the popup menu. When you search for a few seconds, your Xbox controller should be listed. Your Xbox controller will automatically be recognized as a USB device when you choose it from the device list when you launch Windows 10.

3. Pair Your Xbox One Controller Via Wireless Adapter

This attachment makes attaching your Xbox wireless controller to your PC simple, even if you need to purchase an Xbox Wireless adapter separately. To configure your pad on a PC with a wireless connection, use this technique.

1. Installing the Xbox Wireless adapter is as simple as plugging it into a USB port on your computer. To use the adapter, a laptop must have a USB-A port, which the adapter uses.
2. To turn on your Xbox controller, press and hold the Xbox button on your controller. Once the controller is turned on, press and hold the sync button to begin the process of syncing. Holding down this button (the one with three dashes next to it) until the Xbox logo starts flashing is the only way to exit a game.
3. A few seconds after pressing and holding the Xbox Wireless adapter’s sync button, release the button. Depending on the model, this button may be found on the side or the bottom of the adapter. To tell if your controller is connected, the Xbox logo on your controller will stop flickering and become completely lighted once.

Conclusion

Connecting an Xbox One controller to a computer is easy. Now that you know how to connect through USB or Bluetooth, you can choose the way that works best for your needs. Meanwhile, you should also know a Windows PC isn’t the only device you can attach an Xbox controller to.